ATB Decorative LED Strip Fasteners for Stair Guardrails and Living Room Coving, Hidden Clear Mounting Clips 100-Pack
ATB Decorative LED Strip Fasteners for Stair Guardrails and Living Room Coving, Hidden Clear Mounting Clips 100-Pack
Couldn't load pickup availability
Why you'll love it
- One-side screw design halves install time and fits tight, narrow mounting surfaces where traditional two-screw clips fail
- 98% light-transmittance transparent PC keeps strips visually hidden so brightness and color temperature stay true
- UV-resistant material will not yellow outdoors, preserving a clean look for years
- Magnetic rust-proof 80°-hardness screws resist corrosion in damp and outdoor environments
- Works on wood, plastic, metal, and cement walls, eliminating the need to buy separate clip types per surface
- Bulk 100-pack with 102 screws covers long runs (recommended 3-5 clips per meter) at low per-clip cost
Perfect for
- Permanently mounting IP67 silicone-tube LED strips on outdoor walls, eaves, and garden structures
- Securing waterproof accent lighting under kitchen cabinets, inside wardrobes, and along stair guardrails
- Installing LED strips on narrow surfaces and close to edges where two-screw clips cannot reach
- Fastening LED strips on mixed substrates (wood, plastic, metal, cement) without pre-drilling on soft surfaces
- Replacing traditional two-screw clips to cut installation time on large multi-meter runs
Product Information
1, Simple designed for screwing Silicone Tube IP67 Waterproof LED light strips within 12 mm/0.48in width into wood,plastic board, metal /cement wall, such as Cabinet, wardrobe, guardrail, Eaves, Garden, Carriage,etc 2,Clear Designed and high quality material.High light transmittance and no damage to your leds color temperature .Durable plastic with UV resitant material, Perfect for indoor and outdoor use without change to yellow for a long time. 3,One side fixing by screws.Easy to arrange the light strip and maintain.Recommended to use 3-5 pieces clips for 1 meter LED strip light, will be stronger and will not fall easily.Reduce installation time. 4,Magnetic Screws: Rust-proof and 80 degree hardness suit for wood/plastic board/metal/cement wall etc 5,Package including 100 PCS Transparent Clips and 102 PCS Magnetic Screws.The Light Clips can be applied to -30 - 90 ? working temperature, and can be stored at room temperature for Long Time.
ATB-WL00410 light strip clips for 10mm/12mm wide IP67 waterproof led strip lights, which are upgrading designed,Repalce traditional two screws clips, soft silicone clips. Compared with traditional LED Strip mounting clips have follow advantage: 1. One-side screw can reduce the installation time and difficulty. And, the led strip light can be installed on a narrow surface and more closer to the edge of the surface. 2. Widen the press area between the clips and the light strip, so the clips ensure the levelness and can press the strip light more tightly. 3. Hollow height only 3.5mm/0.138inch (old one is 4.0mm). The tightness can be controlled by twisting the screw as required. 4. Pure PC transparent: light transmittance from 86% increase to 98% ,more easy to hide in plain sight,while ensuring that the brightness and color temperature of the light remain unchanged. Note: Before buying light hanger clips, please kindly check up your led strip width and height. 1.Suit for 10mm/0.39 inch and 12mm/0.48 inch IP67 silicone tube led strip light which is DC12V/24V input.The sealing height of the IP67 Silicone tube are not higher than 3.8mm/0.14 inch.(Silicone seal is elastic),The number and type of LED beads do not affect the use. 2.Don't fit for IP20/IP44/IP65 led strip light and. Installation: 1.Before installing the clips. Please use drill tools punch holes in cement wall/tile wall/thick metal surface and make the markings. For wood/thin metal surface no need puch holes in advance. 2.Putting screws through the clips and then fixed the screw in the marked mounting holes. 3.Adjust led strip and tighten the screw until the clip completely hold the light strip. 4.Check and good job. suggest 3-5 pieces clips within 1 meter strip lights. Package Including:100pcs clips and 102pcs screws
Frequently Asked Questions
Will these clear clips be visible after I install my accent lighting in my living room?
No. The pure PC body has 98% light transmittance and the clips sit at just 3.5mm tall, so once your LED strip is clipped in, the brackets are nearly invisible against most wall, shelf, and cabinet surfaces.
Do the clips match the look of a modern bedroom or designer interior?
Yes. The transparent body blends into any color palette - white ceilings, wood shelving, painted walls, or dark wardrobes - so they preserve the clean aesthetic designers and homeowners want in styled spaces.
Can I use these to mount LED strips inside a glass-front wardrobe without ruining the look?
Absolutely. The clear, low-profile design is ideal for wardrobes, display cabinets, and curio shelves where visible hardware would disrupt the look. The clip essentially disappears once the strip is installed.
Will the clips yellow over time and ruin my room aesthetic?
No. The PC material is UV-stabilized to resist yellowing, so even under bright accent lighting or near windows, the clips maintain their original clarity for years.
How do I get a clean, professional look under my kitchen cabinets with these clips?
Mount one clip every 20-30cm along the underside of the cabinet, press the strip into the hollow, and tighten the single screw. The result is a flush, designer-grade under-cabinet lighting line with no visible clips or wires.
Is this a good mounting solution for stair guardrail ambient lighting?
Yes, this is one of the most popular decorative use cases. The single-screw design fits along narrow rail surfaces where two-screw clips cannot reach, giving you a continuous light line on stair handrails and balustrades.
Can I use these clips to light up a kitchen splashback with hidden accent strips?
Yes. The transparent clips hold 10mm and 12mm IP67 silicone-tube strips tightly against tile, glass, or acrylic splashback edges, letting you create a clean halo of light without visible mounting hardware.
Will the screws leave visible marks on my painted walls or wood trim?
The included screws are small and driven flush, leaving only a tiny pinhole. For most decorative installations, this is hidden behind the strip itself. If you ever remove the clips, the hole is easy to fill and touch up.
How do these clear clips compare to traditional white or black plastic clips for decor projects?
White and black clips always clash with at least some part of your decor. Clear PC clips with 98% transmittance disappear into the environment entirely, which is why designers and home decorators prefer them for visible accent lighting.
Are these better than aluminum mounting channels for a high-end decor look?
Aluminum channels add bulk and a visible metal line, which can disrupt a clean aesthetic. These clear clips sit at 3.5mm, deliver an almost invisible mount, and cost far less per meter - ideal for a seamless designer look.
I'm worried the clips will distract from my carefully chosen color temperature - will they tint the light?
No. The 98% light transmittance means virtually no color shift or brightness loss. Your warm 2700K, neutral 4000K, or cool 6000K strip will render exactly as intended.
Can I trust these clips to hold expensive RGB or tunable white strips securely in my living room?
Yes. The clips grip IP67 silicone-tube strips with a sealing height of 3.8mm or less, holding them firmly against walls, ceilings, and shelves. For a typical 5m living room run, a single 100-pack covers the entire installation with spares.
What if my home project is a small bedside reading light and I do not need 100 clips?
The 100-pack is the most economical option per clip. Even for a small project, keeping the extras on hand means you can add or relocate strips in other rooms without reordering, and the per-clip cost is significantly lower than retail single-packs.
How do I install these LED strip mounting clips step by step?
Step 1: Plan your clip layout, placing one clip every 20-30cm (3-5 per meter). Step 2: Hold each clip against the mounting surface and drive the single screw through the side hole. On soft wood, no pre-drilling is needed; on metal, plastic, or masonry, use a small pilot hole. Step 3: Press your 10mm or 12mm IP67 silicone-tube LED strip into the clip hollow (sealing height up to 3.8mm). Step 4: Continue along the run, ensuring the strip is fully seated in each clip. The whole process takes seconds per clip.
What tools do I need to install these clips?
You need a Phillips-head screwdriver sized to match the included screws. For hard surfaces like metal, concrete, or brick, a power drill with a small pilot bit (about 2mm) is recommended. No special tools, no crimpers, and no adhesive are required.
Can I remove and reuse a clip if I need to relocate my LED strip?
Yes. Unscrew the single screw, remove the clip from the wall, and remount it at the new location. The PC body does not deform during removal, so clips can typically be reused multiple times. You may need a fresh screw if the original hole becomes loose in soft wood.
Are these clips compatible with my 10mm wide IP67 LED strip?
Yes, the clips fit any IP67 silicone-tube LED strip with a width of 10mm and a sealing height of 3.8mm or less. This covers the vast majority of waterproof LED strips on the market.
Will these clips fit a 12mm wide LED strip as well?
Yes. The clip is designed to hold both 10mm and 12mm IP67 silicone-tube strips. The flexible hollow accommodates the wider strip while still gripping the silicone securely.
What exactly is included in the box when I open it?
Each pack contains 100 transparent PC mounting clips and 102 magnetic rust-proof screws. The 2 extra screws provide a small overage in case any are dropped or lost during install. No tools, adhesive, or LED strips are included.
Is the PC clip material durable enough for long-term indoor and outdoor use?
Yes. The clip is molded from pure PC with 98% light transmittance and built-in UV resistance. It will not yellow, crack, or become brittle across its -30°C to 90°C operating range, giving you years of reliable service indoors and outdoors.
Will the magnetic screws interfere with my LED strip electronics or RF signals?
No. The screws are static-mounted mechanical fasteners and do not carry any current. The magnetic property is incidental to their rust-proof stainless-steel composition and has no measurable effect on LED drivers, controllers, or wireless signal transmission.
What is the difference between a one-side screw clip and a traditional two-screw clip?
A traditional two-screw clip requires two drilled holes, two screws, and twice the installation time. It also needs enough flat surface area to fit both screws. A one-side screw clip uses a single screw on one side, halving install time, fitting on narrow surfaces, and delivering the same holding strength for most residential and commercial LED strip applications.
